Long Reach Scalers & Scabbler are specifically designed to reduce the risk of back injury and to extend their use into previously inaccessible areas. Available in 2', 4', 5', and 6' lengths. The Long Reach 'LITE' scalers are lighter in weight than standard Long Reach Scalers while offering the same power.
A vast range of applications include the removal of floor tiles, residue, chemical spills, ice, roofing materials, metal slag and tank cleaning. These tools are ideal for a variety of uses from construction and marine to general factory maintenance and flooring services. To help save on backaches, utilize our ergonomically designed Python Long Reach.
Available accessories including needle scaling attachments, scraper blades and a full range of standard 5/8" hexagon shank chisels including spark resistant beryllium copper chisels for use in hazardous areas.
FEATURES AND BENEFITS:
EXCLUSIVELY DESIGNED CHISEL HOLDER •Modern single ball retainer for safe lock and quick fit
•Choose from the widest range of chisel and scraper blade widths available anywhere: 1" (25mm) to 12" (300mm) including 2" (50mm) and 4" (100mm) spark resistant sizes
THE TRUE CONVERTIBLES
•Converts to needle scaler in seconds
AIR EFFICIENT & ECONOMICAL TO USE
•Consumes only 5cfm @ 90PSI (2.1lps)
•Can be powered by a 2HP compressor
RUGGEDLY BUILT
•Low maintenance, long service life
•Continued performance, even in harsh environments
The 'Breaker' is a heavy duty long reach with a vibration isolated handle for operator comfort. Applications include concrete reduction, removal of tough ceramic tiles, removal of thin set mortars and crack chasing. The 'Breaker' can be fitted with rugged 1", 2", 3", or 4" wide hexagon shank chisels.
FEATURES AND BENEFITS:
•Modern single ball retainer for safe chisel locking and quick change
•Choice of rugged 1", 2", 3", or 4" wide chisels with industry standard 7/8" hexagon shank
•Vibration isolated handle for operator comfort
•Reduces damage to concrete substances
Model
Part No.
Weight
Length
B.P.M.
Air Consumption
BREAKER
157.5599
27lbs(12.3kg)
58.3" (1480mm)
2000
20cfm (546lpm)
LRS55 "Pole Scabbler" Ahead in their class, Long Reach Scabblers and Compactors can be supplied with interchangeable scabbling heads and tamper feet to suit most applications. They are the most powerful tools for deep concrete dressing and for filler tamping especially in and around deep foundations and utility poles when fitted with 4" or 6" tamper feet.
FEATURES AND BENEFITS:
9" THROTTLE HANDLE •Greater control & reduces fatigue
ANGLED AIR INLET
•For operator safety
•Situated below the throttle for better maneuverability
LARGE PISTON DIAMETER
•Greater productivity
SELECTION OF HEADS AVAILABLE
•Interchangeable Scabbler and tamper heads for greater versatility
Model
Part No.
Weight
B.P.M.
Air Consumption
LRS55 c/w 5 Point Scabbler Head
150.5099
30lbs(13.4kg)
1100
25cfm
LRS55 c/w 4" x 4" Compactor Foot
150.5091
29lbs(29lbs(13kg)
1100
25cfm
LRS c/w 6" x 5" Compactor Foot
150.5092
30lbs(13.4kg)
1100
25cfm
Loading
Contact Novatek Corporation for further information at: 1-866-563-7800
Tel: 610.363.7800 - Fax: 610.363.9620
Hours of Operation
Monday-Friday: 9am-5pm EST
Long Reach Scalers & Scabbler are specifically designed to reduce the risk of back injury and to extend their use into previously inaccessible areas. Available in 2', 4', 5', and 6' lengths. The Long Reach 'LITE' scalers are lighter in weight than standard Long Reach Scalers while offering the same power. 
