The MHS-11 & Shrouded MHS-11 Floor Scabbler was designed in association with construction engineers for thick coatings removal, containing and surface preparation of concrete. The MHS-11 minimizes damage to the substrate. This prevents the ingress of water which can freeze and cause cracking.

The MHS-11 is even capable of concrete removal of up to 1/4" in one pass, making it ideal for removing radioactive or PCB contaminated concrete. Optional cruciform heads are available for material reduction with a smoother finish.

FEATURES AND BENEFITS

TUNGSTEN CARBIDE TIPPED HEADS
•11 heads giving 2200 blows per minute per piston
•Designed to reduce damage to aggregate

UNIQUE CUTTER-HEAD ACTION
•Piston exhausts into chamber which reduces wear to moving parts
•Prolongs tool life

3 POINT VIBRATION DAMPING SYSTEM
•Reduces operator fatigue
•Gives better control

LOW AIR CONSUMPTION
•Only requires 70cfm
•Economic running costs
•Operates from a single tool compressor

COMPACT DESIGN
•Body width of only 11" (280mm) for work better between structures

WORKS WITHIN 1/2" OF WALLS
•Reduces the need for further finishing, tools and operations

LARGE REAR WHEELS
•Air maneuverability

Click Here For Large View

Cutter Heads
	Tungsten Carbide Tipped Cruciform Head- Heavy Duty one piece piston-head combination. For use on steel and concrete surfaces. Removal of thick coatings, heavy rust and scale, or texture profiling surfaces.
	Tungsten Carbide Tipped Bush Hammer Head- Heavy Duty one piece piston-head. For use on concrete for bushing, laitance removal and for exposing concrete aggregate.

Model	Part No.	Length	Width	Height	Cutting Width	B.P.M.	Air Consumption
MHS-11	159.6000	13.4" (340mm)	11.2" (285mm)	50.8" (1290mm)	9.84" (250mm)	11 x 2200	70cfm (1982lpm)
Shrouded MHS-11	159.6001	13.4" (340mm)	11.2" (285mm)	50.8" (1290mm)	9.84" (250mm)	11 x 2200	70cfm (1982lpm)