Finally! A safe, efficient, & cost effective way to remove vinyl tile!

The NovaStrip 1026 VAT stripper utilizes "infrared radiant heat" to safely heat tiles, thus breaking the adhesive bond. This allows you to lift intact tiles in a dustless environment. In the past, wetting and hand scrapping was the most common method of removal. This process has proven to be labor intensive and generates a great deal of cleanup. Since water is not required with the NovaStrip 1026, the job is completed with an absolute minimum volume of waste. These machines also cut labor costs by requiring only one operator. Simply place the machine over your tiles to be removed, set the timer and allow it to complete its cycle. Move the machine to the next set of tiles, then easily remove the previously heated tiles. It's That Simple!

FEATURES AND BENEFITS:

•Reduces setup, clean up, and labor costs
•Heated tiles can be lifted INTACT preventing the harmful release of dust or hazardous materials
•Removes up to six 12" x 12" tiles at a time
•Massive 28" x 40" footprint
•Rapid heat-up and cool down for efficient operation
•All solid state electronics assure precision and reliability
•Modular design, fully assembles and disassembles in less than 5 minutes for easy transport
•Can even ship via UPS
•Individual ceramic emitter strips on heat element and fully replaceable
•No need to replace entire heat panel
•All components are UL and CE listed and are covered by a one year warranty

Model	Part No.	Weight	Height	Tile Removal	Power Requirements	Pad Size
NovaStrip 1026	N1026	88lbs	46"	9" x 9"=12 12" x 12"=6	220/240volt 50Amp, 1Phase	28" x 40"

The NovaStrip 378 utilizes "Infrared Radiant Heat" at 110volts to safely heat tiles, thus breaking the adhesive bond. This allows you to lift "INTACT" tiles in a dustless environment. The NovaStrip 378 features individual ceramic emitter strips that are fully replaceable. No need to replace the entire heat panel.

The use, simply plug the unit into any 20Amp, 110volt grounded outlet, place the machine over the tiles to be removed, allow it to complete its heating cycle, then easily remove the tiles.

FEATURES AND BENEFITS

•NEW midrange heater from Novatek
•14" x 28" panel allows for 2ft² removal
•Works off of a 110v-20Amp current
•NEW processor features easier cycle settings
•Perfect compliment to the N1026

Model	Part No.	Weight	Height	Tile Removal	Power Requirements	Pad Size
NovaStrip 378	N378	45lbs	46"	9" x 9"=3 12" x 12"=2	110volt, 15Amp	14" x 28"

The EcoStrip N100 gives a new meaning to a light weight, portable infrared heat tile machine. Weighing only 18lbs and utilizing a 15Amp, 100volt grounded outlet makes this an all around winner.

The EcoStrip N100 heat panel also features individual ceramic emitter strips that are fully replaceable. No need to replace the entire heat panel.

FEATURES AND BENEFITS

•Perfect for steps, closets and compact areas
•Twenty minute motion switch automatically shuts down power if the machine is left unattended
•Adjustable/removable handle eliminates bending and operator fatigue

Model	Part No.	Weight	Height	Tile Removal	Power Requirements	Pad Size
EcoStrip N100	N100	18lbs	35"-44"	9" x 9"=1 12" x 12"=1	110volt, 15Amp	14" x 14"